The FLOYD SC compact carrier board converts the Nvidia Jetson Nano / TX2 NX / Xavier NX modules into complete embedded systems by providing interface circuitry, I/O connectors for all module features, camera interfaces, power supply, and additional I/O in a solution measuring only 4.3x3.3 / 110x85mm. A novel expansion I/O connector enables connection of standard and custom daughterboards with additional I/O functionality to simplify the development of customized Jetson solutions.
Floyd SC features up to 3 CSI camera inputs, 2 Gigabit Ethernet ports, 2 USB 2.0 ports, 1 USB 3.0 port, 1 RS-232 and 1 RS-232/485 serial port, 16 GPIO, and HDMI + DP display support. With the NX module installed a second Ethernet port and a CAN port are available. An M.2 M-Key NVME socket supports both 2242 and 2280 size I/O and flash storage modules. Wide voltage input 7-24V provides adaptability to a range of power supplies.
Floyd SC is available in two configurations: a low-cost model with reduced features for Nano and a full-featured model with complete features supporting NX and TX2 NX.
Floyd SC is supported by a full Linux BSP based on Nvidia's Jetpack. This software is available as a free download from our support area.
Floyd SC is available as both a carrier board component and as an assembled subsystem including the selected Jetson module with Linux OS installed. Both heat sink and fan sink cooling options are available.
 |
Product Configurations |
Floyd SC is available in a cost-optimized configuration for the Nano module and a full-featured configuration for the TX2-NX and NX modules. The full-featured model can also work with the Nano, however some features are unavailable due to not being present on the module.
| Feature | FLDSC-BB01 | FLDSC-BB02 |
| Modules supported | Nano | Nano, TX2 NX, NX |
| Gigabit Ethernet | 1 | 2 (with NX) |
| USB 3.0 | 1 | 1 |
| USB 2.0 | 2 | 2 |
| Serial ports | 1 RS-232 + 1 RS-232/485 | 1 RS-232 + 1 RS-232/485 |
| CAN | N/A | 1 port 2.0b (with NX) |
| Display | 1 HDMI | 1 HDMI + 1 DP |
| Camera | 3x 2-lane CSI Interface | 3x 2-lane CSI Interface |
| Storage / Expansion socket | M.2 M-Key 2242 / 2280 dual footprint | M.2 M-Key 2242 / 2280 dual footprint |
| Daughterboard expansion | N/A | 40-pin connector with PCIe + USB 3.0 connectivity to host module (NX only) |
|
Block Diagrams |
|
I/O Expansion Connector |
A flex cable connector on model BB02 enables additional I/O expansion with off the shelf or custom-developed daughterboards. The connector offers USB 3.0 and PCIe connectivity to the Jetson module, as well as power. Because an I/O daughterboard is much quicker and easier to design than a full-custom carrier board, Floyd SC makes it easy to design customized Jetson solutions with additional I/O. For example, additional USB 3.0 ports, additional Ethernet ports, an Ethernet switch, or even a PoE PD circuit can all easily be implemented on a daughterboard and directly connected to the Jetson module using a native high-speed I/O interface. Daughterboards typically are the same size as the main board and mount directly underneath the main board for convenient packaging.  | |  | | | Side by side mounting provides flexibility for system integration. |
|
|
Subassembly Options |
Floyd SC is available as a complete computing board-level subsystem with Jetson module, heat sink, and Linux OS installed. These subsystems save time by eliminating the assembly, programming, and testing effort.
| Model | Baseboard | Jetson Module |
| FLDSC-ASY-01-NAO | BB01 - Basic | Nano |
| FLDSC-ASY-02-XNX | BB02 - Full | Xavier NX |
| FLDSC-ASY-02-TNX | BB02 - Full | TX2 NX |
|
Complete Systems |
Floyd SC is available as a JetBox system with Jetson module and Linux OS installed, ready to load your application and deploy. All main board I/O, including the I/O on the pin headers, is brought out to the front panel using familiar commercial connectors.
|
Cables |
Most Floyd I/O other than the camera inputs is available using commercial connectors located along the front edge of the board. This arrangement simplifies the design of enclosures. The second serial port, GPIO signals, and CAN port (available with NX module only) do require cables.
All front-facing I/O cables for Floyd SC are industry standard, including Ethernet, HDMI, DisplayPort, and USB. Camera interface cables are generally included with the camera. Other I/O connections require custom cables. A cable kit is available with these custom cables: CK-FLDSC-01 includes the following cables:
| No. |
Qty |
Cable |
Description |
Drawing |
| 1 |
1 |
6980524 |
External battery cable, discrete wires |
Show |
| 2 |
1 |
6981075 |
Dual serial port DB9M | Show |
| 3 |
1 |
6981164 |
Cable, IDC20F to IDC20F, 2mm pitch, 12" length |
Show |
| 4 |
1 |
6981182 |
CANbus 2.0 cable, JST 1x4 to DB9M |
Show |
| 5 |
1 |
C-20-18 |
20-conductor ribbon cable, 2x10 .1" IDC sockets |
Show |
For convenient access to the GPIO and utility signals during development, a screw terminal board is available from third party suppliers. A typical example is here
|
Heat Sink |
The Jetson modules can consume significant power under heavy load and require cooling. Diamond Systems offers a passive heat sink and active fan sink specifically designed for use on Floyd SC. The fan on the fan sink is controlled automatically by the Linux OS and also by a DSC-supplied utility program.
|
Power Input |
Power is provided via a barrel jack with 5.5mm OD / 2.5mm ID dimensions. The input voltage range is 10.8-25.2VDC (supports 7V +/-5% and 24V +/-5% input voltages). A minimum 30W power supply is recommended to support peak power of the carrier, Jetson module, and attached I/O devices and provide a suitable safety margin. Diamond AC adapter PS-12V-03 provides 12V / 5A DC power with the required mating plug and an IEC 3 prong input power plug. A US AC power cord is included.
|
Ordering
Information |
|
