Products where used:

Standard ATA/IDE Bus interface

• 512 Bytes per sector
• ATA command set compatible
• Selectable Master/Slave Operation
• Support Data Transfer up to PIO Mode-4
• Support up to Multiword DMA Mode-2

Capacities Available (capacities not listed are special order)

• 32, 64, 128, 256, 512 MB
• 1, 2, 4, 8 GB

Multi-tasking Technology Enables Fast Sustained Write Performance

• Max. 6 MB/sec under PIO mode
• Max. 7 MB/sec under DMA mode

Fast Sustained Read Performance

• Max. 10 MB/sec under PIO mode
• Max. 11 MB/sec under DMA mode

WP_PD# pin configurable by host for prevention of data overwrites

• Added data security through User Selectable Protection Zones

Power Management Unit

• Immediate disabling of unused circuitry

RoHS Compliant

Zero Power Data Retention

• Batteries not required for data storage

Temperature Range

• Industrial -40°C to 85°C

Intelligent ATA/IDE Module

• Built-in Embedded Flash File System
• Implements dynamic wear-leveling algorithms to substantially increase longevity of flash media
• Built-in ECC support corrects up to 3 random 12-bit symbols of error per 512 Byte sector

Support Voltage Read and Write Operation

• 3.3 V and 5.0 V compatibility

Low Power Consumption

• Active mode: 35 mA/55 mA (3.3V/5.0V) typical
• Sleep mode: 100 A/150 A (3.3V/5.0V) typical

Standard IDE Connector

• 44-pin 2mm pitch socket

Rugged Design

• Mounting tab with screw provides secure, shock/vibration-resistant installation

IDE Flashdisk Programming Board

Our ACC-IDEEXT programming adapter is used to connect an IDE flashdisk to a desktop computer via an IDE cable. Both industry-standard cable connections are supported: 40-pin .1 pitch cables and 44-pin 2mm pitch cables. The 44-pin connection includes 5V power; the 40-pin connection requires an external 5V power source. The power connector is compatible with standard desktop PC power supplies.