|
| |
 |
PC/104 Bus Headers |
Use these parts to add your own circuit to a PC/104 system, or to add a PC/104 module to your own custom board. These are the same headers used on all our PC/104 modules and are guaranteed to be compatible with any PC/104-compliant header. Order 64-pin (8-bit main bus) and 40-pin (16-bit bus extension) components separately. Standard headers shown are stackthrough, allowing you to mount a module above and below. Non-stackthrough headers have the female socket on top and solder tail pins, allowing you to mount a module on top only.
PC/104 Standards for Bus Headers
The 8-bit (64-pin) header is required on each PC/104-compliant or PC/104-compatible circuit board. The 16-bit (40-pin) header is optional and is not used by all modules. All of Diamond Systems' PC/104 modules come with both headers.
|
PC/104 Mounting Spacers |
We now offer PC/104 spacers for board mounting. These .600" length spacers are a non-standard length and can be hard to find in small
quantities. Order either in bulk quantity (4 per board required) using SPC-104, or as the MTG104 single-board mounting kit. The kit includes 4 each spacers, #4-40 x
1/4 screws, and #4 nuts.
|
Models and Accessories |
| |
 |
Connectors and Spacers |
 |
|
|
|
 |
|
| PC/104 40-pin (2x20) stackthrough header |
|
|
|
|
|
| PC/104 board mounting kit: 4 each PC/104 spacers, #4 screws, #4 nuts |
|
|
|
|
|
| PC/104 40-pin (2x20) nonstackthrough header |
|
|
|
|
|
| PC/104 mounting spacers, 0.6"length aluminum round #4-40 M/F |
|
|
|
|
|
| PC/104 64-pin (2x32) stackthrough header |
|
|
|
|
|
| PC/104 64-pin (2x32) nonstackthrough header |
|
|
|
|
|
| EMX mounting hardware kit |
|
|
|
|
|
|
